dmesg - 64GB ADATA SP600
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-999-generic (kernel@gomeisa) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #201507092205 SMP Fri Jul 10 02:06:47 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000074f09fff] usable
BIOS-e820: [mem 0x0000000074f0a000-0x0000000075a81fff] reserved
BIOS-e820: [mem 0x0000000075a82000-0x0000000075d07fff] usable
BIOS-e820: [mem 0x0000000075d08000-0x00000000768d9fff] ACPI NVS
BIOS-e820: [mem 0x00000000768da000-0x0000000076f60fff] reserved
BIOS-e820: [mem 0x0000000076f61000-0x0000000076fb8fff] type 20
BIOS-e820: [mem 0x0000000076fb9000-0x0000000076ff7fff] usable
BIOS-e820: [mem 0x0000000076ff8000-0x0000000076ff8fff] reserved
BIOS-e820: [mem 0x0000000076ff9000-0x0000000076ffbfff] usable
BIOS-e820: [mem 0x0000000076ffc000-0x0000000076ffcfff] reserved
BIOS-e820: [mem 0x0000000076ffd000-0x0000000076ffdfff] usable
BIOS-e820: [mem 0x0000000076ffe000-0x0000000077083fff] reserved
BIOS-e820: [mem 0x0000000077084000-0x0000000077297fff] usable
BIOS-e820: [mem 0x0000000077298000-0x0000000077ff8fff] reserved
BIOS-e820: [mem 0x0000000077ff9000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x76118000 ACPI 2.0=0x76118000 SMBIOS=0xf0570 MPS=0xfd610
SMBIOS 2.8 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X99-UD4-CF, BIOS F5 08/18/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 00007F000000 mask 3FFFFF000000 uncachable
3 base 0000E0000000 mask 3FFFF0000000 write-through
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff8800000fd8a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff3000, 0x02ff3fff] PGTABLE
BRK [0x02ff4000, 0x02ff4fff] PGTABLE
BRK [0x02ff5000, 0x02ff5fff] PGTABLE
init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
[mem 0x47fe00000-0x47fffffff] page 1G
init_memory_mapping: [mem 0x460000000-0x47fdfffff]
[mem 0x460000000-0x47fdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x74f09fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x74dfffff] page 2M
[mem 0x74e00000-0x74f09fff] page 4k
init_memory_mapping: [mem 0x75a82000-0x75d07fff]
[mem 0x75a82000-0x75d07fff] page 4k
BRK [0x02ff6000, 0x02ff6fff] PGTABLE
BRK [0x02ff7000, 0x02ff7fff] PGTABLE
init_memory_mapping: [mem 0x76fb9000-0x76ff7fff]
[mem 0x76fb9000-0x76ff7fff] page 4k
BRK [0x02ff8000, 0x02ff8fff] PGTABLE
init_memory_mapping: [mem 0x76ff9000-0x76ffbfff]
[mem 0x76ff9000-0x76ffbfff] page 4k
init_memory_mapping: [mem 0x76ffd000-0x76ffdfff]
[mem 0x76ffd000-0x76ffdfff] page 4k
init_memory_mapping: [mem 0x77084000-0x77297fff]
[mem 0x77084000-0x77297fff] page 4k
init_memory_mapping: [mem 0x77ff9000-0x77ffffff]
[mem 0x77ff9000-0x77ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x45fffffff]
[mem 0x100000000-0x45fffffff] page 1G
RAMDISK: [mem 0x35870000-0x36c2ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000076118000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000076118098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000076145FA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000761181D8 02DDC8 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x00000000768D6F80 000040
ACPI: APIC 0x00000000761460B0 00012C (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000761461E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000076146228 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000761462C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000076146308 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x0000000076146350 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x0000000076146380 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x00000000761463B8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x0000000076146448 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x00000000761464B0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x00000000761464E0 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x0000000076147338 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x0000000076147378 009BF9 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: BGRT 0x0000000076150F78 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x0000000076150FB0 0000CC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x0000000076151080 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00000000-0x47fffffff]
NODE_DATA(0) allocated [mem 0x47fff5000-0x47fff9fff]
[ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88046f800000-ffff88047f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000074f09fff]
node 0: [mem 0x0000000075a82000-0x0000000075d07fff]
node 0: [mem 0x0000000076fb9000-0x0000000076ff7fff]
node 0: [mem 0x0000000076ff9000-0x0000000076ffbfff]
node 0: [mem 0x0000000076ffd000-0x0000000076ffdfff]
node 0: [mem 0x0000000077084000-0x0000000077297fff]
node 0: [mem 0x0000000077ff9000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x000000047fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
On node 0 totalpages: 4150157
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7440 pages used for memmap
DMA32 zone: 476142 pages, LIFO batch:31
Normal zone: 57344 pages used for memmap
Normal zone: 3670016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x74f0a000-0x75a81fff]
PM: Registered nosave memory: [mem 0x75d08000-0x768d9fff]
PM: Registered nosave memory: [mem 0x768da000-0x76f60fff]
PM: Registered nosave memory: [mem 0x76f61000-0x76fb8fff]
PM: Registered nosave memory: [mem 0x76ff8000-0x76ff8fff]
PM: Registered nosave memory: [mem 0x76ffc000-0x76ffcfff]
PM: Registered nosave memory: [mem 0x76ffe000-0x77083fff]
PM: Registered nosave memory: [mem 0x77298000-0x77ff8fff]
PM: Registered nosave memory: [mem 0x78000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046f400000 s96280 r8192 d30696 u262144
pcpu-alloc: s96280 r8192 d30696 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4085284
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15701124K/16600628K available (7994K kernel code, 1237K rwdata, 3964K rodata, 1472K init, 1292K bss, 899504K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:552 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3000.273 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.54 BogoMIPS (lpj=12001092)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
ftrace: allocating 31419 entries in 123 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x00000076e32000 end: 0x00000076e40fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz (fam: 06, model: 3f, stepping: 02)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 13755102827528 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (96008.73 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x75d08000-0x768d9fff] (12394496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:55:00, date: 07/12/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:11.4: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:11.4: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfbf3c000-0xfbf3c7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf3b000-0xfbf3b00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf38000-0xfbf38fff]
pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf37000-0xfbf373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf36000-0xfbf363ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf35000-0xfbf350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
acpiphp: Slot [2] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1002:679a] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfbe00000-0xfbe3ffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x74f0a000-0x77ffffff]
e820: reserve RAM buffer [mem 0x75d08000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ff8000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ffc000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ffe000-0x77ffffff]
e820: reserve RAM buffer [mem 0x77298000-0x77ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20224K (ffff880035870000 - ffff880036c30000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x709d7000-0x749d7000] (64MB) mapped at [ffff8800709d7000-ffff8800749d6fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3f4793967, max_idle_ns: 440795291494 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU12 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU13 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU14 sig=0x306f2, pf=0x4, revision=0x25
microcode: CPU15 sig=0x306f2, pf=0x4, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1436734504.512:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 7552k, total 7552k
efifb: mode is 1600x1200x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x75
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf37000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-999-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf36000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-999-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4ff8916aa957ba0fc4a3e79043d37642efc07227'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:919:952
tty tty9: hash matches
processor cpu7: hash matches
memory memory5: hash matches
rtc_cmos 00:00: setting system clock to 2015-07-12 20:55:04 UTC (1436734504)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1472K (ffffffff81d37000 - ffffffff81ea7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 188K (ffff8800027d1000 - ffff880002800000)
Freeing unused kernel memory: 132K (ffff880002bdf000 - ffff880002c00000)
random: systemd-udevd urandom read with 2 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x6 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xfbf3c000 port 0xfbf3c180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfbf3c000 port 0xfbf3c200 irq 29
ata4: DUMMY
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:29:ab:0d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
usb 1-9: new high-speed USB device number 2 using xhci_hcd
usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 2-5: New USB device found, idVendor=045b, idProduct=0210
usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
usb 4-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATA-9: ADATA SP600, 5.2, max UDMA/133
ata3.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata2.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX3 n/a PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
scsi 2:0:0:0: Direct-Access ATA ADATA SP600 5.2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: [sda] Attached SCSI disk
usb 3-1: New USB device found, idVendor=8087, idProduct=800a
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1: New USB device found, idVendor=8087, idProduct=8002
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Braille Device Support...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Mounting Debug File System...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Read required files in advance...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Wait for Complete Device Initialization...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:03:00.1: Force to non-snoop mode
snd_hda_codec_realtek hdaudioC0D2: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input10
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
intel_rapl: Found RAPL domain package
[drm] radeon kernel modesetting enabled.
Adding 16600060k swap on /dev/sda3. Priority:-1 extents:1 across:16600060k SSFS
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 760000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1682:0x3221).
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
ATOM BIOS: Tahiti
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:03:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:03:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[TTM] Zone kernel: Available graphics memory: 8128722 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading tahiti Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
[drm] radeon: dpm initialized
radeon 0000:03:00.0: Direct firmware load for radeon/TAHITI_vce.bin failed with error -2
radeon 0000:03:00.0: radeon_vce: Can't load firmware "radeon/TAHITI_vce.bin"
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff88046a74ec00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff88046a74ec04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff88046a74ec08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff88046a74ec0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff88046a74ec10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90002c35a18
radeon 0000:03:00.0: VCE init error (-22).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: MSI limited to 32-bit
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE0479000
[drm] vram apper at 0xE0000000
[drm] size 16384000
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x100
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:03:00.0: registered panic notifier
[drm] Initialized radeon 2.43.0 20080528 for 0000:03:00.0 on minor 0
usb 1-9: New USB device found, idVendor=045b, idProduct=0209
usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-9:1.0: USB hub found
hub 1-9:1.0: 4 ports detected
usb 1-12: new high-speed USB device number 3 using xhci_hcd
usb 1-12: New USB device found, idVendor=1a40, idProduct=0101
usb 1-12: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-12: Product: USB 2.0 Hub
hub 1-12:1.0: USB hub found
hub 1-12:1.0: 4 ports detected
usb 1-9.4: new high-speed USB device number 4 using xhci_hcd
usb 1-9.4: New USB device found, idVendor=1b1c, idProduct=1ab1
usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-9.4: Product: Voyager
usb 1-9.4: Manufacturer: Corsair
usb 1-9.4: SerialNumber: 300000063FFF60
usb-storage 1-9.4:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-9.4:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[348]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1436734515.724:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.724:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.724:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.724:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.724:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.724:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.732:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.732:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.732:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=613 comm="apparmor_parser"
audit: type=1400 audit(1436734515.732:11): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=613 comm="apparmor_parser"
usb 1-12.1: new full-speed USB device number 5 using xhci_hcd
cgroup: new mount options do not match the existing superblock, will be ignored
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 1-12.1: New USB device found, idVendor=1532, idProduct=0007
usb 1-12.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12.1: can't set config #1, error -71
usb 1-12.2: new low-speed USB device number 6 using xhci_hcd
usb 1-12.2: New USB device found, idVendor=04f2, idProduct=0833
usb 1-12.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12.2: Product: USB Keyboard
usb 1-12.2: Manufacturer: CHICONY
usb 1-12.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-12.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-12.4: new high-speed USB device number 7 using xhci_hcd
usb 1-12.4: New USB device found, idVendor=148f, idProduct=5372
usb 1-12.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-12.4: Product: 802.11 n WLAN
usb 1-12.4: Manufacturer: Ralink
usb 1-12.1: USB disconnect, device number 5
usb 1-12.1: new full-speed USB device number 8 using xhci_hcd
scsi 4:0:0:0: Direct-Access Corsair Voyager 0.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 63438848 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdc] Asking for cache data failed
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI removable disk
usb 1-12.1: New USB device found, idVendor=1532, idProduct=0007
usb 1-12.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12.1: Product: DeathAdder
usb 1-12.1: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2/1-12.2:1.0/0003:04F2:0833.0001/input/input18
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-12.2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.2/1-12.2:1.1/0003:04F2:0833.0002/input/input19
random: nonblocking pool is initialized
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-12.2/input1
input: Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.0/0003:1532:0007.0003/input/input20
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:14.0-12.1/input0
usb 1-12.4: reset high-speed USB device number 7 using xhci_hcd
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=14)
wlan0: associated
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00001100/00002000
pcieport 0000:00:03.0: [ 8] RELAY_NUM Rollover
pcieport 0000:00:03.0: [12] Replay Timer Timeout
pcieport 0000:00:03.0: AER: Corrected error received: id=0018
pcieport 0000:00:03.0: can't find device of ID0018
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: can't find device of ID0018
wlan0: deauthenticated from 60:a4:4c:69:bf:d0 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
wlan0: authenticate with 60:a4:4c:69:bf:d0
wlan0: send auth to 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: authenticated
wlan0: associate with 60:a4:4c:69:bf:d0 (try 1/3)
wlan0: RX AssocResp from 60:a4:4c:69:bf:d0 (capab=0x411 status=0 aid=14)
wlan0: associated
sdb:
sdb:
sdb:
sdb:
sdb:
sdb:
sdb: sdb1
sdb: sdb1
sdb: sdb1
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00001100/00002000
pcieport 0000:00:03.0: [ 8] RELAY_NUM Rollover
pcieport 0000:00:03.0: [12] Replay Timer Timeout
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00001100/00002000
pcieport 0000:00:03.0: [ 8] RELAY_NUM Rollover
pcieport 0000:00:03.0: [12] Replay Timer Timeout
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00001100/00002000
pcieport 0000:00:03.0: [ 8] RELAY_NUM Rollover
pcieport 0000:00:03.0: [12] Replay Timer Timeout
usb 1-12.4: USB disconnect, device number 7
xhci_hcd 0000:00:14.0: WARN Event TRB for slot 7 ep 2 with no TDs queued?
wlan0: deauthenticating from 60:a4:4c:69:bf:d0 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
pcieport 0000:00:03.0: AER: Multiple Corrected error received: id=0018
pcieport 0000:00:03.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=0018(Transmitter ID)
pcieport 0000:00:03.0: device [8086:2f08] error status/mask=00001100/00002000
pcieport 0000:00:03.0: [ 8] RELAY_NUM Rollover
pcieport 0000:00:03.0: [12] Replay Timer Timeout